Cleaning And Maintenance - Inventum IVW6050A Benutzerhandbuch

DELAYING THE PROGRAM
Note:
The start time of a program can be delayed up to 24 hours.
1. Push the timer button to delay the start time of a program. Every time you push the button the start time will be
delayed with 1 hour.
2. Push the timer button again to increase the delay of the start time or to cancel the timer.
3. Close the door to activate the timer.
The program will start when the timer has finished.
STOPPING THE APPLIANCE
Note:
The appliance is silent for 40 to 45 minutes during the drying process.
Note:
A buzzer sounds five times when the program is finished.
Note:
The diswasher door must not be blocked when set to open automatically. This can disrupt door lock
functionality.
Note:
The floor lamp blinks for 5 minutes to indicate the program is finished.
1. Open the door if the automaric door function is disabled.
2. Wait a few minutes before you unload the appliance. The dishes are very hot and can break.
3. Push the on/off button to switch off the appliance.
6

Cleaning and maintenance

CLEANING THE APPLIANCE
Caution:
Make sure that the appliance is off.
Note:
If you clean the appliance regularly, it will improve the service life.
1. Clean the outside of the appliance. Use a damp cloth.
2. Clean the seals of the door. Use a soft cloth.
3. Clean the inside of the appliance in case of high contamination:
a. Fill the detergent reservoir with a special cleaning agent for dishwashers.
b. Select a program with a high temperature.
c. Start the program.
CLEANING THE FILTERS
The filter system of the appliance consists of three components: the main filter, the micro filter and the sieve.
44 • English