Mounting and Installation
Connection sketches for the installer:
Connection sketches for the installer:
2× 220-240/400 V, 2~N
16A
1× 220-240V, 1~N
32A
62
Notes:
Connect
Hob blue and grey to neutral conductor / N in the box
Black on L1
Brown on L2
blue and grey do not disconnect!
Yellow-green on PE
If you are not sure, contact the customer service.
Notes:
If connected to one phase, the original cable
must not be used!
A new cable is not included in the delivery!
The cable cross-section must correspond
to the fuse protection!
Bridges must be used for the connection box
of the hob!
The appliance is not suitable
for operation with an EU plug!