Technical Data - S+S Regeltechnik Thermasgard Rtm Bedienungs- Und Montageanleitung

G
®
THERMASGARD
Calibratable room temperature measuring transducer THERMASGARD
ing the actual temperature in an elegant enclosure made of plastic, with snap-on lid, base with 4-hole attachment for installation on vertically or
horizontally installed in-wall flush boxes, with predetermined breaking point for on-wall cable entry, or in enclosure made of stainless steel (top and
bottom part are of stainless steel, the lid is screwed on), vandal-proof version e.g. for schools, military barracks, and public buildings. This room
temperature transmitter ⁄ residential room temperature sensor is used to detect ⁄ display temperatures in closed dry rooms, in apartments, in of-
fices, supermarkets and business facilities.

TECHNICAL DATA:

Power supply: ........................ 24 V AC ⁄ DC ± 10 % for output 0 - 10 V
Power consumption: ................ < 1.0 VA ⁄ 24 V DC
Sensor:................................. Pt1000, DIN EN 60751, class B
Measuring range: .................... multi-range switching
Output: ................................. 0 - 10 V or 4...20 mA
Ambient temperature: ............. measuring transducer –30...+70 °C
Connection type: ..................... 2- or 3-wire connection
Process connection: ................ by screws
Enclosure: ............................. plastic, material ABS,
Dimensions: ........................... 85 x 91 x 27 mm (Frija I)
Electrical connection: .............. 0.14 - 1.5 mm² via terminal screws
Installation: ........................... wall mounting or on in-wall flush box Ø 55 mm,
Humidity: .............................. < 95 % r. H.,
Protection class: .................... III (according to EN 60 730)
Protection type: ..................... IP 30 (according to EN 60 529)
Standards: ............................ CE conformity, electromagnetic compatibility
Optional: ............................... 8-digit display, cutout 36 x 14 mm (W x H),
Accessories: .......................... see last chapter
Type ⁄ WG1 ⁄ 01
RTM1 - U
R T M1- U
R T M1- U _ DI S P L AY
R T M1- U E
RTM1 - I
R T M1- I
R T M1- I _ DI S P L AY
R T M1- I E
Extra charge:
RTM
15 - 36 V DC for output 4...20 mA
(depending on working resistance)
< 2.2 VA ⁄ 24 V AC
with 8 switchable measuring ranges,
see table (other ranges optional)
operating range –30...+70 °C
with manual zero point correction (± 10 K)
colour pure white (similar to RAL 9010),
(optional stainless steel)
75 x 75 x 25 mm (stainless steel)
base with 4-hole for mounting on vertically or
horizontally installed in-wall flush boxes for cable
entry from the back, with predetermined breaking
point for on-wall cable entry from top ⁄ bottom in
case of plain on-wall installation
non-precipitating air
according to EN 61326,
according to EMC directive 2004 ⁄ 108 ⁄ EC
for displaying actual temperature
Sensor Output
Pt1000 0 - 10 V
Pt1000 0 - 10 V
Pt1000 0 - 10 V
Pt1000 4...20 mA
Pt1000 4...20 mA
Pt1000 4...20 mA
other ranges optional
® RTM 1 with continuous output, with or without optional display for display-
Features
–
Display
Stainless steel enclosure
–
Display
Stainless steel enclosure
Rev. 2015 - 1.0 GB
Display Item No.
IP 30, U - variant
110 1-4131-00 00-200
■ 1101 -4131-20 00-200
1101 -4 151-000 0-200
IP 30, I - variant
1101 -4 132-000 0-200
■ 1101-4 132-200 0-200
1 101-415 2-0000-2 00