MOB MO9085 Bedienungsanleitung Seite 2

MO9085
EN
Bluetooth Speaker
Power:
•
Works on internal rechargeable Lithium battery. Please
charge your speaker fully before first use.
•
To charge the battery use the micro USB cable (included):
insert the jack into "Charging" jack located on the back of
the unit and then plug the USB connecter of charging
cable into the USB port on a computer for charging.
•
A red light will indicate the charging situation. When
battery is full, the red light will turn off automatically.
•
Disconnect the USB cable when it is fully charged
Playing music via Bluetooth
•
Turn your Bluetooth speaker on by sliding the power
switch located on the back side of the speaker to 'ON'
position.
•
The blue indicator light will flash quickly. This indicates
that the speaker in pairing mode and searching for your
Bluetooth device.
•
Turn on the Bluetooth function on your device, search the
speaker named "MO9085" and select it, your device will
pair without a password. (If required, enter the password
"0000" to finalize the paring). The Blue light will begin to
flash slowly after pair is complete.
•
Start playing music on your device. Keep your device
within 33feet (10 meters) of your speaker.
•
Adjust the volume of your device to a comfortable level.
•
Turn off the unit when not in used.
Universal speaker operation
•
For other music devices without Bluetooth, use Auxiliary
input cable. Connect the included Auxiliary cable into the
speaker's Auxiliary port and plug the other end into your
device auxiliary port