EKSA Telecom H16 Benutzerhandbuch Seite 9

One to Two Bluetooth
Connection
The headset supports the simultaneous connection of two devices
via Bluetooth. The specific steps are as follows:
(1) First connect the headset to device A through Bluetooth pairing, and then
turn off device A. At this time, the headset is disconnected and enters pairing
mode.
device A
OFF
(2) Then open device B, and successfully connect with the headset through
Bluetooth search pairing.
EKSA-H16
device B
(3) Turn on device A again, and then connect the headset through device A.
After the connection is successful, the headset will be connected to device A
and device B at the same time.
device A
Note: The headset is connected to two devices at the same time.
Only one of the devices works when using it. When the other
device needs to be used, the currently working device needs to
be suspended.
device B
7