AXXAIR 122 Originalbetriebsanleitung Seite 38

INNOVATIVE ORBITAL SOLUTIONS
6 Usage of the cutting machine
6.1 Installing the motor or the torch on the machine
WARNING: Clean all support surfaces well before installing the motor or the torch on the motor's
supporting plate.
- The motor or the torch is installed on the tool supporting plate by sliding it into the slot provided for that
purpose.
The positioning is assured by two preinstalled plates which ensure that the angle head adheres to the
-
support surface of the tool supporting plate.
The tube's fastening
6.2
Warning: It is extremely important, so that the machine will not be damaged, to support the tube both in
front and behind when it extends beyond the machine for more than 500 mm or if there is an overhang
weighing more than 25 kg.
Good alignment between the fastening of the tube and the machine guarantees the cut's perpendicularity.
The alignment between the cutting machine and the fastening system for the cut tube avoids pinching the
tool and therefore guarantees its longevity.
CCBSB-X1
Join experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
CCBSB-X2
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - commerce@axxair.com - www.axxair.com
ENGLISH
-38-
CCSER1
or
CCSER2