AXXAIR 122 Originalbetriebsanleitung Seite 29

INNOVATIVE ORBITAL SOLUTIONS
2.2 Cutting machine configuration
This machine is the best answer for optimal preparation of welded tubes and other types of assemblies in
the food industry, pharmaceutical, chemical fields, etc.
This procedure provides a rake face with a surface in a very good state and with very limited burring. The
perpendicularity between the sheered surface and the tube is just tenths of a millimetre.
With a blade in good condition and adequate cutting parameters, the cut is considered to be without burrs.
Cutting motor :
Supply
Low speed :
115 V
High speed :
Low speed :
230 V
High speed :
Pneumatic
To use this motor you will need to order suitable cutting blades for the tube thickness you want to cut and, if
necessary, lubricant.
Join experience
Reference
FS15
FS19
FS25
FS29
MOPD
For further information on the installation and operation, please read the
cutting machine manual.
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
FS25/29 FS15/19
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - commerce@axxair.com - www.axxair.com
ENGLISH
-29-
MOPD