AXXAIR 122 Originalbetriebsanleitung Seite 30

INNOVATIVE ORBITAL SOLUTIONS
2.3 Bevelling machine configuration
Above a thickness of 3 mm, simple fusion involves a melt volume that is too
significant to guarantee proper geometric control of the weld bead. To
remedy this, bevelling reduces the quantity of material to be fused in order to
achieve proper penetration. As a result, several passes are usually needed to
finish the weld bead.
AXXAIR's orbital bevelling machines use a carbide milling head rotating at
high speed to remove a large quantity of chips in a single rotation of the tool
around the tube (orbital) without lubricant.
Possibility of upgrading from a cutting machine to
a chamfering machine with a kit purchase
referenced GA10-M1-XX2 (115V) or GA10-M2-
XX2 (230V) (with XX corresponding to the size of
the concerned machine).
GA10-M1-122 => Machine 122
GA10-M1-172 => Machine 172
GA10-M1-222 => Machine 222
GA10-M1-322 => Machine 322
GA10-M2-122 => Machine 122
GA10-M2-172 => Machine 172
GA10-M2-222 => Machine 222
GA10-M2-322 => Machine 322
Join experience
For further information on the installation and operation, please read the
chamfer machine manual.
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
ENGLISH
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - commerce@axxair.com - www.axxair.com
-30-