Grundig SIS 9180 Benutzerhandbuch Seite 38

3 Operation
3.9 Automatic steam function
Steam sensor detects your irons motion and provides right amount of steam without using the steam
trigger (4) according to the mode you selected.
Set the fabric-appropriate tem-
perature and steam using the
level adjustment button
(See 3.6)
C
Led light in front of the iron will only illuminate when the automatic steam function is
activated.
3.10 Intense steam
Pulling and releasing the steam trigger (4) once will provide intense steam.
C
• Repeatedly pulling the steam trigger (4) may decrease intense steam's effect.
• Intense steam's effect may decrease after using continuous steam by pulling and hold-
ing the steam trigger (4) or using the automatic steam function.
WARNING: Never direct the steam at people or animals.
38 / EN
Push the automatic steam but-
ton (2) to activate automatic
(3). steam function.
– Sensor will be activated and
the LED display will display "
".
– At the same time, led light
(18) in front of the iron will il-
luminate.
Push the automatic steam but-
ton (2) to disable automatic
steam function.
– Sensor will be disabled and
the " " on the LED display
will fade.
– Led light (18) will disappear.
Steam Generator / User Manual