Cleaning
The desk only requires minor attention. Clean the surface only with dry soft cloth. Do not use
any liquid cleaner or compressed air. Solely the flexible hand rests are allowed to be
cleaned with a mild cleaner and a damp cloth. Do not use any solvent.Check ventilation
holes are clear.
Depending on the environment we recommend to clean the console professionally every 2 –
5 years.
Marking and cleaning the magnetic fader labels.
Use the provided felt marker (EDDING 140S ohp marker, permanent) for the magnetic fader
labels. And clean them with ethyl alcohol – after this the label is ready for use again.
Maintenance
Electric shock warning: The unit should be serviced by qualified personnel only, as
live parts may be exposed when opening and/or removing coverings; besides others,
you run the risk of suffering an electric shock.
Battery (Replacement only by qualified personnel)
Change every 10 years. For details contact distributor.
grandMA2
Data
Transport
Important Safety
Instructions
Safety and
Environment
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
34