Man 3008 VOX Bedienungsanleitung Seite 38

settings, the AM power depends on the jumper setting on the
lower printed circuits board side (see country switching).
6.2. SCAN
Your MAN 3008 VOX incorporates a scanning feature. The radio
will scan through all channels and will stop at BUSY channels. It
will stay on that channel further seven seconds after conversation
has stopped and then it will resume scanning.
• To start scanning, turn on the power first and adjust the
volume and squelch.
• Press the SCAN button to start scanning. The word SC will
appear in the LCD display and the unit will start scanning.
• If you want to stop scanning you can push the scan button
again or press the push to talk switch.
This will shut off the scanning function and transmit on that
channel.
6.3. VOX function / EMG Channel selection
Short press VOX/EMG button to activate or deactivate the
VOX function. The VOX function allows to communicate hands
free. When the VOX function is activated, the radio recognizes
speech and automatically starts transmitting.
38