Siemens TI9575X1DE Gebrauchsanleitung Seite 71

Device info
Display for network and device
information
Press $/± button, turn the rotary
1.
selector to the left and select "Home
Connect setting".
Press the rotary selector.
2.
Press the right-hand navigation
3.
button under "select".
Use the rotary selector to select
4.
"Appliance info" on the display.
Press the right-hand navigation
5.
button under "select".
The SSID, IP, MAC address and
serial number of the appliance are
displayed for a few seconds.
Press $/± button to close the menu.
6.
Display
The top right-hand corner of the display
shows the Home Connect status with a
symbol:
| Connected to the network
Not connected to the network
E
No connection to server
†
Remote diagnostics
If a fault occurs, the after-sales service
can use remote diagnostics to access
your appliance.
Contact the after-sales service, making
sure that your appliance is connected to
the Home Connect server and checking
that the remote diagnostics service is
available in your country.
Note: For more information and to
check whether the remote diagnostics
service is available in your country,
please visit the Help & Support area of
the Home Connect website for your
country: www.home-connect.com
About data protection
When the fully automatic coffee
machine is connected for the first time
to a WLAN network which is connected
to the Internet, the appliance transmits
the following categories of data to the
Home Connect server (initial
registration):
Unique appliance identification
■
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
Security certificate of the Wi-Fi
■
communication module (to ensure a
secure data connection).
The current software and hardware
■
version of the fully automatic coffee
machine.
Status of any possible previous
■
resetting to factory settings. This
initial registration prepares the Home
Connect functions for use and is
only required when you want to use
these Home Connect functions for
the first time.
Note:
Please note that the Home
Connect functions can only be used in
conjunction with the Home Connect
app. Information on data protection can
be accessed in the Home Connect app.
Declaration of Conformity
BSH Hausgeräte GmbH hereby
declares that the appliance which
features Home Connect is in
accordance with the basic requirements
and the other relevant provisions of the
directive 2014/53/EU.
A detailed RED Declaration of
Conformity can be found online at
www.siemens-home.bsh-group.com on
the product page of your appliance with
the additional documents.
2.4 GHz band: max. 100 mW
Home Connect en
71