Siemens TI9575X1DE Gebrauchsanleitung Seite 64

en Menu settings
Q
Menu settings
T his menu is used for changing settings
M e n u s e t t i n g s
individually, accessing information and
starting a programme.
Changing settings
Press $/± button, turn the rotary
1.
selector to the left and select
"Settings". Press the rotary selector.
The different setting options will
appear in the display.
Select the desired setting using the
2.
rotary selector.
The current setting is highlighted in
colour on the display.
Press the navigation button under
3.
"select".
4. Use the rotary selector to change the
setting.
The following settings are available:
Settings
Language
Water hardness
Home Connect*
Switch off after
Brightness display
64
Possible settings
Different languages
1 (soft)
■
2 (medium)
■
3 (hard)
■
4 (very hard)
■
Softening device
■
Settings for connection to WLAN network (home network) and mobile devices
(see section "Home Connect").
5 minutes
up to to
3 hours
Level 1 up to level 10
Standard setting 7
5. Press the navigation button under
"confirm".
The setting has been saved.
Press $/± button to exit "Menu".
6.
The drink selection appears on the
display.
Notes
You can switch to the previous level
■
by pressing the navigation button
under "back".
The setting procedure can be
■
aborted by pressing the navigation
button under "abort".
Press $/± button to exit the menu at
■
any time.
If no entry is made within approx.
■
2 minutes, the menu closes
automatically and the settings are
not saved.
Explanation
Setting the language to be used for display texts.
Setting in line with the hardness of the local
water supply.
The preset water hardness is level 4 (very hard).
The water hardness can, for example, be
requested from your local water supplier.
It is important to set the water hardness cor-
rectly, so that the appliance indicates accurately
when the descaling programme should be run.
If a water softening system is installed in the
house, please select the "Softening device" set-
ting.
Setting that determines how long the appliance
should wait after the last beverage preparation
before it automatically switches itself off.
The factory setting is 30 minutes.
Setting that governs the brightness of the dis-
play