Ground Lift Switch - LD REVOLVER SERIES Bedienungsanleitung

ACTIVE SYSTEMS FEATURES:
12

GROUND LIFT SWITCH

This switch is to avoid ground loop hum. Should a low humming noise (ground loop) occur, it can be elimi-
nated by switching the Ground Lift to On. Ground looping is caused by two pieces of equipment being doubly
earthed.
13 AC INPUT
Mains connector.
14
ON / OFF
Mains switch. Before switching on the power to the unit, all level controls should be set to minimum. Other
wise, microphones already connected to the system may cause undesired feedback.
08