Westfalia 10 69 48 Bedienungsanleitung Seite 31

Cleaning
1. Switch the vacuum cleaner off and unplug from power mains before cleaning
the device.
2. Clean the housing of the vacuum cleaner only with a moistened cloth. Do not
use chemicals or abrasives, in order not do damage the surface.
Storing
1. After vacuum-cleaning, lift up the vacuum cleaner into the storage position (1).
2. Insert the turbo brush into the provided holder on the handle.
3. Store the accessory at the provided storage compartment on the vacuum
cleaner.
4. Press the releasing button on the joint mechanism in order to fold down the
handle and store the vacuum cleaner space-savingly. This fold-down position
is perfect for carrying the vacuum cleaner.
5. Wind the cord around both cord hooks (13) and (15). Turn the top cord hook
upwards to make sure the cord cannot fall out.
6. Store the vacuum cleaner in a dry and cool place. Do not store the device
close to heat sources such as heaters etc. and do not expose the vacuum
cleaner to direct sunlight for an extended time. Extreme heat will damage the
vacuum cleaner.
Accessory
Article No. for Filter Set:
Article No. for large Drive Belt:
Article No. for small Drive Belt:
Cleaning and Storing
Art. 10 69 48
Art. 91 57 074
Art. 91 57 140
27