Bosch GNF Professional 35 CA Originalbetriebsanleitung Seite 19

OBJ_BUCH-126-002.book Page 19 Wednesday, February 19, 2014 1:49 PM
Noise/Vibration Information
Measured values determined according to EN 60745 (lime-sand brick).
Typically the A-weighted noise levels of the product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined
h
according to EN 60745:
a
h
K
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
20.01.2014
Bosch Power Tools
https://tm.by
Интернет-магазин TM.by
Assembly
Dust Extraction
 Dusts from materials such as lead-containing coatings,
 Prevent dust accumulation at the workplace. Dusts can
The vacuum cleaner must be approved for the extraction of
masonry dust. Bosch provides suitable vacuum cleaners.
The machine can be plugged directly into the receptacle of a
Bosch all-purpose vacuum cleaner with remote starting con-
trol. The vacuum cleaner starts automatically when the ma-
chine is switched on.
Place a vacuum hose 12 (accessory) onto the vacuum connec-
tion 13. Connect the vacuum hose 12 with a vacuum cleaner
Helmut Heinzelmann (accessory). An overview for the connection of various vacu-
Head of Product Certification um cleaners can be found at the end of these instructions.
PT/ETM9
Information for the Use of Wall Chasers
Please observe the following notes in order to reduce the dust
emissions occurring while working.
– Use only the combinations of wall chaser and dust-
– Observe the operating instructions of the vacuum cleaner
GNF 20 CA
dB(A) 94
dB(A) 105
dB 3
2
m/s =4.0
2
m/s =1.5
some wood types, minerals and metal can be harmful to
one's health. Touching or breathing-in the dusts can cause
allergic reactions and/or lead to respiratory infections of
the user or bystanders.
Certain dusts, such as oak or beech dust, are considered
as carcinogenic, especially in connection with wood-treat-
ment additives (chromate, wood preservative). Materials
containing asbestos may only be worked by specialists.
– As far as possible, use a dust extraction system suitable
for the material.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
easily ignite.
category M vacuum cleaner recommended by Bosch. Oth-
er combinations can lead to insufficient dust collection and
separation.
for maintenance and cleaning of the vacuum cleaner, in-
cluding the filter. Empty dust collection containers imme-
diately once full. Clean the filters of the vacuum cleaner
regularly and always insert the filters completely into the
vacuum cleaner.
3 609 929 C89 | (19.2.14)
English | 19
GNF 35 CA
102
113
3
=4.0
=1.5