Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ASSEMBLING THE BASE SUPPORTS
o
Assemble the base supports and secure them in place with the screws supplied.
BEFORE STARTING THE APPLIANCE
o
Connect the appliance to the mains. Turn the thermostat knob (4) clockwise up to
the stop (Pos.6). Switch the convector on with the toggle switch:
Switch (1) in setting I
Switch (2) in setting II
Switch (1+2) in setting III
ADJUSTING THE TEMPERATURE
o
As soon as the temperature set on the unit has been reached in the room, turn the
thermostat knob (4) slowly counter clockwise until the indicator light goes out. The
thermostat will now automatically control and maintain the prevailing temperature
of the room. Depending on what you require and the outside temperature, you can
adjust the appliance to a lower setting. This way, you will use as little power as
possible.
VENTILATION
o
This convector is fitted with an additional fan, so it also works with ventilated
convection. This means that the room is warmed up quickly and evenly. The fan is
operated independently via the "Ventilation" switch (3). This has the added
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
800 Watt
1,200 Watt
2,000 Watt
Werbung
