Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• OPERATION
Starting
o
Take out the heater from the carton carefully. Please save the carton for off-season
storage.
o
Make sure the power switch is in the OFF position before plugging it in.
o
Ensure the heater is fully assembled according to the Mounting Guide.
o
It is better not to use the same electric outlet with other high wattage electrical ap-
pliances in order to avoid overloading your circuit.
o
Plug in the unit and turn on the power switch, it shows the current time and the but-
tons " " / "
o
CAUTION: For a change of location when using the stand feet, lift the unit as the stand
surface could be scratched if moved.
Setting keys activation / standby mode
o
In standby mode (after 10s), only the temperature display is lit, touch the area below
the temperature display to activate the setting keys.
Time Setting
o
Press the buttons " " and " " together for 3s, the time setting is activated and the
Week Indicator (6) flashes.
o
Select a day by pressing " " or " ", then press " " and the Hour Indicator (5)
flashes.
o
Set the hour by pressing " " or " ", then press " " and the Minute Indicator (7)
flashes.
o
Set the minute by pressing " " or " ", then press " " to save the setting, or after
5s the setting will be saved automatically.
Temperature Setting
o
Press the button " ", the temperature setting is activated and the Temperature In-
dicator (17) flashes.
o
Set the temperature by pressing " " or " ", then press " " to save the setting, or
after 5s the setting will be saved automatically.
o
Or set the temperature by pressing " " or " " on the remote control and press OK
to save the setting.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
" / " " / " " will light up for 10s. After that it falls into standby mode.
50
Werbung
Inhaltsverzeichnis
