Sony HVL-20DW2 Bedienungsanleitung Seite 9

Removing the
battery pack (see Fig.
m)
1 Set the POWER switch to OFF.
2
While pressing the BATT button on
the video light, slide out the battery
pack in the direction of the arrow.
Replacing the bulb
(See Fig.
0
)
Use a Sony XB-20DX halogen lamp (not
supplied).
1
While pressing the top and bottom
part of the video light, open the cover
towards you.
2
Remove the used bulb holding it at
the base then insert a new bulb.
3
Replace the cover.
Cautions
• The surface of the cover becomes hot when
in use. Be-sure that the cover is cool
enough to handle before removing.
• The bulb becomes hot when it is burnt out.
Be sure that the bulb is cool enough to
handle.
• Do not touch the reflector of a new bulb
with bare hands.
Wrap it with a soft dry cloth when
replacing. Clean off fingerprints or dirt if
necessary.
• Insert a new bulb into its socket at a
straight angle.