Werbung
17
Finally, buckle the
G 3
EN
Zum Schluss befestigen Sie den
DE
Tischplatte.
Enfin, fixez
le support d'alimentation à la carte.
G 3
FR
Por último, fije
el soporte de la fuente de alimentación al
G 3
ES
tablero.
Infine, agganciare
G 3
IT
della scrivania.
Wciśnij w blat zaślepki otworów na kable (G)3.
PL
40
power supply holder on the desk top.
Netzteilhalter an der
G 3
il supporto dell'alimentatore al piano
IMPORTANT SAFEGUARDS
EN
1. Initialization
When the system is abnormal,orthe hand
operation
controller displays "RST", you need to initialize
the sit stand desk. Theinitialization operation is to
press and hold the "DOWN" button until the
motor stops, release the button, and thenoress
"DOWN" for5 seconds to automaticallv
enterinitialization mode. At this time. the "DOw"
button cannot bereleased.fthe "DOWN"button is
released, the svstem stops the initialization
mode. After the initialization iscompleted, the
buzzer wi sound a beep, indicating that the
initialization is successful.
2. Up and
1. When the "UP" key is pressed, the desktop
down button
runs upwards untill it reaches the highest point of
operation
the desktop.
2. When the "DOWN" key is pressed, the desktop
runs downward until it reaches the lowest point of
the desktop.
3. When the "UP" or "DOWN" key is pressed for
a short time, the desktop runs a small distance
correspondingly to realize inching.
41
Werbung
