Werbung
FM radio
32 FM Radio channels can be stored through computer program software;
1)Press the [MENU] key to turn off the radio, or turn on the radio, press [EXIT] to exit.
2)Long press the Exit button to switch between the VFO channel and MR storage channel in
radio mode;
3)Long press the [* Scan] button to save the radio frequency as the radio channel;
4)Short press the [#] button to turn on or off DW. Dual Watch represents that in FM radio
mode, if there is an intercom signal coming in,
it will first switch to receiving the intercom signal. If the intercom signal disappears, it will
return to the FM Radio signal.
Version information
Displays the Serial number and firmware version.
Detailed functional operations
1.Save an analog Channel
1)Input 144.25000MHz on Band A or Band B;
2)Press the Menu key to enter Band A or Band B Set;
3)Set the C-CDC and/or the R-CDC. If the C-CDC or the R-CDC is different, then set C-CDC
and R-CDC separately.
4)After completing the above operations, it is currently a temporary channel that can be used
for transmission and reception.
5)Enter the Main Set– "Save CH" menu again, select an empty channel to save as a new
channel.
2.Save a digital channel
1)Input 144.25000MHz on Band A or Band B;
2)Long press the Exit button to switch between FM and DMR mode.
3)Select a Color Code;
4)DMR Mode: Simplex;
5)Choose DMR slot;
6)Select the Radio ID to be used for the current channel;
7)Select the call contact for the current channel. Return to the main interface to edit a
temporary channel for communication;
8)Enter the Main Set– "Save CH" menu again, select an empty channel to save as new
channel.
3.Make an analog repeater channel
1)In VFO mode, input a receiving frequency that is the same as the repeater transmission
frequency;
2)For example, 439.2000MHz is the transmission frequency of the repeater, it will be the
reception frequency of the radio;
3)Enter Band A or B to set the frequency difference direction, in the Shift Up menu item,
choose "Minus", and Shift Freq edit 08.0000,
The transmission frequency of the radio is 439.2000-8.0000 MHz, which is 431.20000 MHz;
4)The repeater generally has sub tone settings, Set the same CTCSS tone used by the repeater
on the radio;
5)After completing the above operations, the standby interface of the radio will display
439.2000Mhz;
6)It will display 431.20000Mhz and the CTCSS when transmitting.
4.Make a digital repeater channel
1)In VFO mode, input a receiving frequency that is the same as the repeater transmission
frequency;
2)For example, 439.2000MHz is the transmission frequency of the repeater, it will be the
reception frequency of the radio;
3)Enter Band A or B to set the frequency difference direction, in the Shift Up menu item,
choose "Minus", and Shift Freq edit 08.0000,
07
Werbung
