Xblitz RF400 CAM Bedienungsanleitung Seite 42

1. PS – programme service (shows radio station's name, up to 8 letters at once.
Serves as a basic function of RDS).
2. AF – alternative frequencies (if the picked radio station can be played at a di -
erent frequency with better quality, the device will automatically switch to that
frequency. Very useful when travelling, as the device looks for radio stations
broadcasting the same programme, but at a better quality.)
3. TP – tra c programme. Stations marked as TP regularly broadcast information
on tra c. Works constantly, as a basic function if RDS.
4. TA – lets you listen to announcements about tra c. When the information
is received, TRAFFIC will show on screen. If music or video files were being played
from USB/ SD/ Bluetooth, they will stop when the announcement is being played.
E. FILES FROM USB/ MICROSD
If you want to play music from your USB/ microSD drive, just connect it to the
device - it will detect the external drive and automatically start playing the files.
Filenames, track number, length of track, playtime, amount of tracks, artist's
name and additional information will show on screen. Information about the track
can only be displayed if the file contains said information.
Additionally, the screen shows additional modes (shu e, loop) and a 12-band
spectrum analyzer.
1. CH+ - press to pause/play the track
2. |<< >>|: press to jump back/forward. Holding the button will rewind/fast
forward the track with the sound muted.
Pressing the MENU button when playing music unlocks the following functions:
1. Turning the knob lets you switch tracks, pressing the knob will play the chosen
track.
2. Pressing the |<< button will allow you to choose from files available on the
active memory drive, displayed in the lower left corner of the screen. Turning the
knob switches between options: MUSIC, VIDEO, FOTO. Pressing the knob confirms
the change.
a. Reccomended memory drive format is FAT32. Do not use NTFS format drives.
b. If the device doesn't detect the USB/microSD drive, pull the drive out and
connect it again. If that doesn't work, press MODE to change file source.
Reset or restart the device if neccessary.
c. If the device doesn't recognize files on the memory drive, follow the instructions
from the previous point. You can also connect the USB drive to a device when it's
turned on. The system should automatically read and update the contents of the
drive.
42