Herunterladen Diese Seite drucken

AgfaPhoto Realishot VLG-4K Bedienungsanleitung Seite 2

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
EN
SAFETY NOTES
CAMERA :
• Please do not insert other objects into the
camera's card slot except the microSD card.
• When the camera is powered on for just few
seconds, the image on display maybe not be
stable. It is normal, not camera failure.
• Due to the optical performance of the lens, color
dispersion may occur at the edge of the image.
It is normal, not camera failure.
• The microSD card will get hot after using for a
long time. It is normal, not camera failure.
• The camera's screen heats up after using the
camera for a long time. It is normal, not camera
failure.
• The camera does not have an auto focus
function. To get the best picture, it is suggested
to take a photo two meters away from the object.
• If the camera is not to be used for a long time,
please take out the battery and put them in s
dust-free and dry environment which temperature
is less than 30°C.
• To make sure long battery life, please make sure
the battery is fully discharged before storage.
• Please make sure the battery is charged and
discharged at least one time every 3 months.
• If there is dust or dirt on the lens or display,
please use a clean and soft lens cleaning cloth to
wipe it softly.
• The camera is precise instrument, please prevent
it from falling, knocking shaking, etc.
• Do not expose the unit to bumps, vibration,
dust, or extreme humidity. This could lead
to malfunctions, short circuits or damage to
batteries and components.
• Do not expose the unit to direct sunlight, flames
or high temperatures.
2
• Do not expose the unit to dripping water
or splashes
• Do not use the unit if it does not operate
normally.
• Do not repair the unit yourself. Only allow repairs
to be carried out by a qualified person.
• This unit has been designed for domestic use
only.
• The unit may only be used as described in this
manual.
TRIPOD :
• Do not connect the output interface on the
tripod with the input interface on the tripod
• Do not use this product in high temperature
or humid environment.
• Do not dip the product into corrosive liquids.
Please avoid impact, extrusion or fire.
• Do not disassemble this product.
• If the tripod haven't been used for a long time,
it is recommended to discharge and fully charge
the tripod every 3 months.
MICROPHONE :
• The microphone equipped with a professional
condenser microphone core with high
sensitivity, which needs to be protect from fall-
off and strong strike.
• Keep the microphone in a dry and clean place if
the microphone is not used for a long time.
• When the microphone stops working, please
turn the power switch to "OFF" to save battery
power. When it is not used for a long time,
please remove the battery to prevent battery
leakage and damage to the circuit.
• When the power is low, please replace the
battery in time.
•T o achieve good sound reception effect, please
install the equipped windproof cover.

Werbung

loading