Canon ELPH 2 IXUS II Bedienungsanleitung Seite 51

Problem
Cause Remedy Page
The film does not
•Custom function •Set custom 48
automatically rewind. CF3 is set to 1. function CF3 to 0.
The photographs
• When the shutter was •Ensure that the AF
19
are blurred. released, the AF light
emitter/receptor were
blocked.
light emitter/ receptor
are not blocked by
hair, fingers, etc.
■ In self-timer shooting,
you stood immediately
in front of the camera
when pressing the
shutter bufion.
• Make sure you do not
stand immediately m
front of the camera
when pressing the
shutter button.
35
■ The camera moved
when the shutter
button was pressed
(camera shake).
• Press the shutter
button gently.
22
• The AF light
emittedreceptor may
be dirty.
•Wipe them clean. 19
Questions and Answers
01 Can conventional 135 (35mm) film be used?
A1 No it cannot be used. Use 1X240 film cartridges.
Q2 Can slide (reversal) film be used with this camera?
A2 Yes it can.
Q3 What is ISO?
A3 The ISO number indicates the film's sensitivity to light in
numerical terms. The higher the number, the more
sensitive the film is to light.
Q4 The picture was taken with date imprinting, but it
doesn't appear on the index print. Why is this?
A4 The date and time are recorded on the film surface
magnetically. This data is read electronically and imprinted
during the printing process. This is why the date and time
data may not appear on the index print sheets.
Q5 When converted to a 35mm camera, what is this
camera's 23-46 mm focusing distance equivalent to?
A5 Approximately 29-58 mm (for H prints).
0
51