Canon ELPH 2 IXUS II Bedienungsanleitung Seite 37

Replacing the Remote Control Battery
Replace the battery when the remote control will no
longer release the shutter.
Battery: One CR 2032 3V lithium battery
1
Pull out the battery
holder.
• Use a pen or other pointed
implement to push in the
release button as you slide
the battery holder out.
Load a new battery into
the holder and fit the
holder back into the
remote control.
• Ensure that the + and -
terminals are positioned
correctly.
«
• Remote control photography may not be possible if
the remote control sensor on the camera is exposed j
to sunlight or strong fluorescent light. In such
situations, use the self-timer to take the picture, or
move the camera to another location.
• The camera's remote control function may not
operate correctly if the camera is close to a
fluorescent light during signal reception. If this occurs,
j
move the camera away from the fluorescent light.
B
* Remote control shots can be taken for the 4 minutes I
that the
®
icon is displayed.
• Set the camera on a steady surface or use a tripod,
j
• The Focus Lock function can be used in the same |
way as in normal photography. (-> p.34)
0-37