cinetto B-moved PS40.3 Montageanleitung Seite 80

SOURCE
DEVICE
3.6 Checks
Check that each door moves correctly.
Check that the system is effective in avoiding crushing, by introducing an object between the cabinet side and the closing door.
Perform this checks in order to avoid any risk, damage or injury due to possible faults or malfunctioning of the system.
4. Use instructions
4.1 Door opening
The door opening command can be given by slightly pushing on the door or by using the remote control.
Push the door a few millimetres in its opening direction and the system will automatically detect the displacement and operate the
motor until the door reaches its open position.
Alternatively, press the button on the radio control corresponding to the door to be opened and the system will receive the signal
80
0 - 48
N/O
SWITCH
DEVICE
0 - 48V
MAX 2A
N/O
SWITCH
DEVICE DEVICE
O
I