Candy BCTD H7A1TE-S Bedienungsanleitung Seite 66

Fix the hinges in place (on the
l
door) with the 4 screws provided
(A) (figure 4).
Fix the magnet (B) in place
l
using screw (C) (figure 4).
Mount the plate (D) on the right
l
or left-hand side, depending on
your installation requirements
(figure 5).
Place the plastic support (E)
l
under the plate and fix it in
position with screw (F) (figure 5).
Snap mount cap (G) in the
l
lower position (figure 5).
Mount the furniture door to the
l
front of the dryer using the
hinges. Place
under the hinges (I) (figure 6)
and then fix in position with
screw (H).
Slide the dryer into an opening
l
of the size indicated in the
diagram (figure 7).
the spacers
66
5
2
7
4
1
6