Conel CLEAR PRO FILL Bedienungsanleitung Seite 21

6.
START-UP
To put the fi lling stati on into operati on, press the
menu with the or
Aft er this specifi cati on, the fi lling of the heati ng system begins and ends according to the set parame-
ters.
-key.
Press the -butt on to
initi ate the start-up.
1. Select the treatment type
(HWE, HVE, HVE+) with the
or -butt on.
3. Use the or
set the measured input
hardness.
5. Use the
or
to set the desired target
pressure of the heati ng
system.
7. Use the
or
to set the desired maximum
fi lling ti me.
-butt on and select the item „Start-up" from the
-to
-butt on
-butt on
2. Select the cartridge size
(2,5, 4 or 7 litres) with the
or -butt on.
4. Use the
or
to set the desired conduc-
tance (only possible with
demineralisati on) or the in-
iti al hardness (only possible
with soft ening).
6. Use the
or
to set the desired maximum
fi lling volume.
8. Use the
or
to indicate whether this
is the initi al fi lling of the
heati ng system.
21
-butt on
-butt on
-butt on