Ikra IEVL 1738 Gebrauchsanweisung Seite 31

Fault
Motor does not run
Roller does not rotate
Motor output drops
Poor scarifying perfomance
Noisy running, application vibrates
Fault, which cannot be rectified with the help of this table, may only be attended to be an authorized company
(workshop).
13. REPAIR SERVICE
Attention! Electrical repairs may only be carried out by a
skilled electrician or a customer service workshop!
If you send the machine to us for repair, please describe
the fault.
14. SPARE PARTS
If you need accessories or spare parts, please contact our
Service department.
When working with this tool, do not use any accessory parts
other than those recommended by our company. Otherwise
the operator or others in the vicinity could suffer serious
injuries, or the tool could be damaged.
The following information should be provided when or-
dering spare parts:
• Type of machine
• Item number of the machine
GB | Operating Instructions
Cause
No voltage
Roller blocked
Toothed belt defective
Working depth too high
Dirty housing
Lawn too long for scarifying
Working depth too high
Worn blades
Balde damaged
15. WASTE DISPOSAL AND ENVIRONMENTAL
Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a col-
lection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection points.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling man-
agement and waste acts. This does not pertain to the ac-
cessory parts and auxiliary equipment without electrical
components accompanying the waste equipment.
GB-11
Remedy
Check connection line and connec-
tion protection switch
Check roller
Workshop
Selected lower working depth
Clean housing
Lawn too long for scarifying
Select lower working depth
Replace worn blade
Workshop
PROTECTION
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/
EC on waste electrical and electronic equipment
and its implementation in national law, waste
electric tools must be collected separately for
environmentally-compatible re-use.