LGB 2091-03 Bedienungsanleitung Seite 8

CV61 Back-EMF: A djustment frequency(0: often, 255: seldom)
Specifieshow often per second the motor voltage is
adjusted- accordingly,the loco will react to curves and
rades immediatel or with a short dela
CV62
Back-EMF:Max.Adjustment (0: small, 255: max.)
Limits the total adjustment in motor voltage.If there is a very
large load on the motor, the adjustment will not exceed this
value - for more realisticoperations, so that locos will slow a
bit on rades.
CV67 Speedsteps programmed by user (seeCV29):
28 speedsteps are programmed in CV67to CV94.
to
With LGBMTS,everysecond valueis skipped (14 speedsteps).
CV94
Factorypre-set speedsteps:
7, 9, 11, 13, 16, 20, 24, 28, 32, 36, 42, 48, 54, 60, 68, 76, 84,
92, 102, 112, 124, 136, 152, 168, 188, 208, 230, 255
Pre-set valuesfor user-programmablespeedsteps:
8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120, 128,
136, 144, 152, 160, 168, 176, 184, 192, 208, 224, 240, 255
Hint: The speedsteps are factory pre-set and programming is
not necessary.Usethe 55045 MTS PCDecoderProgramming
Modulefor programming.
14
General programming procedure
(0.255)
with 55015 Universal
- Registers CVI through CV4 can be
programmed directly by program-
(0.255) [255]
ming the desired function value in
the register.
- To program higher CVs:
- In register CV6, input the number
of the register you want to pro-
(0.255)
gram.
- Then input the desired function
value in register CV5.
Example:
Set hand-over function to ON (pro-
gram register CV54to function value
3).
To program:
- Displayshows "P -
- Select register CV6(press 6).
- Input 54 (register you want to pro-
gram).
- Execute programming (press right
arrow button)
- Displayshows "P -
- Select register CV5(press 5).
- Input 3 (selectedfunction value)
- Execute programming (press right
arrow button).
When programming with the 55045,
all function values are programmed
directly.
AUTHORIZED SERVICE
Improper service will void your war-
ranty. For quality service, contact
your authorizedretaileror one of the
following LGB factory service sta-
tions:
Ernst Paul Lehmann
Reparatur-Abteilung
Saganer Strasse 1-5
D-90475 Nürnberg
GERMANY
Telephone:(0911) 83707 0
Fax:(0911) 83707 70
LGB of America
RepairDepartment
Remote:
6444 Nancy Ridge Drive
San Diego, CA92121
USA
Telephone:(858) 795-0700
Fax:(858) 795-0780
You are responsiblefor any shipping
costs, insurance and customs fees.
Hint: Information on LGB products
and LGB representativesaround the
world is available online
www.lgb.com
CAUTION! This model is not for chil-
dren under 8 years of age. This
model has small parts, sharp parts
and moving parts. Savethe supplied
packagingand instructions.
Products, specifications and avail-
ability dates are subject to change
without notice. Some products are
not available in all markets and at all
retailers. Some products shown are
pre-production prototypes. LGB,
LGB of America, LEHMANN and the
LGB TOY TRAIN logotype are regis-
tered trademarks of Ernst
Lehmann Patentwerk, Germany.
Othertrademarks are the property of
their owners. 0 2003 Ernst
Lehmann Patentwerk.
Patentwerk
at
Paul
Paul
15