Safety Information
Batteries are marked with the symbol of a crossed
out wheelie bin without a single black line under-
neath. The battery must be recycled either accord-
ing to local regulations or sent to your "Customer
Centre" for handling.
Safety
WARNING Risk of Injury
Failure to follow all the instructions may result
in electric shock, fire and/or serious personal in-
jury.
Ensure that you read and understand all in-
structions:
• Safety Information delivered together with
the different parts of the system.
• Product Instructions for installation, opera-
tion and maintenance of the different parts
of the system.
• All locally legislated safety regulations with
regard to the system and parts thereof.
Save all safety information and instructions for
future reference.
Statement of use
This product is intended to be used to monitor and
control tools. No other use permitted.
EMC RESTRICTION OF USE: FOR INDUS-
TRIAL USE ONLY.
General Safety Instructions
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
To reduce risk of injury, everyone using, installing,
repairing, maintaining, changing accessories on, or
working near this tool must read and understand
these instructions before performing any such task.
When using electric equipment, basic safety pre-
cautions, including the following, should always
be followed to reduce the risk of fire, electric
shock and personal injury.
4
© Atlas Copco Industrial Technique AB - 9834 4137 00
Our goal is to produce equipment that help you
work safely and efficiently. The most important
safety device for this or any equipment is YOU.
Your care and good judgement are the best protec-
tion against injury. All possible hazards cannot be
covered here, but we have tried to highlight some
of the important ones.
Only qualified and trained operators should install,
adjust or use this equipment.
For additional safety information consult:
• Other documents and information packed
with this equipment.
• Your employer, union and / or trade associ-
ation.
• Further occupational health and safety in-
formation can be obtained from the follow-
ing web sites:
• http://www.osha.gov (USA)
• http://europe.osha.eu.int (Europe)
Electrical safety
WARNING This apparatus must be earthed.
• Earthed equipment must be plugged into a
socket that has been properly installed and
earthed according to appropriate regula-
tions. Never remove the earth pin or modify
the plug in any way. Do not use any adapter
plugs. Check with a qualified electrician if you
are in any doubt as to whether the outlet is
properly earthed. Should the equipment suffer
electronic malfunction or breakdown, the earth
provides a low resistance path to carry electric-
ity away from the user. Applicable only to
Class I (earthed) equipment.
• Disconnect from the power supply before ser-
vicing.
• Failure to comply with these operating instruc-
tions may impair the safety of this equipment.
• Only use the cord supplied with the controller
to connect to the mains, and the cord supplied
with the tool to connect to the controller. Do
not modify the cords or use them for other pur-
poses. Use only genuine replacement parts.
• Failure to follow these instructions may result
in electric shock.
• Must not be used in explosive atmospheres.
Focus 60/61