Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
22
Meaning of light signals
Troubleshooting
Problem
The machine does not switch
on.
The on/off button is flashing
slowly.
11 Press the lungo button to start the flushing cycle.
Note: The water tank will be emptied without interruption. The flushing cycle
lasts about 3 minutes.
12 When the flushing cycle has finished, the ristretto and lungo button flash a
few times.
Note: It is normal that some water remains behind in the water tank after the
descaling procedure.
The machine switches off. The descaling procedure is finished.
-
The on/off button flashes slowly: the machine is heating up.
-
The on/off button flashes quickly: the water tank is empty, fill the water tank
with tap water.
-
All buttons light up continuously: the machine is ready for use.
-
The selected coffee button flashes slowly: the machine is preparing the coffee
recipe.
-
The selected coffee button flashes quickly:
-
Programming is activated.
-
The new coffee volume is saved.
-
The ristretto and lungo button flash simultaneously after brewing coffee: you
need to descale the machine.
This chapter summarizes the most common problems you could encounter with
your machine. If you are unable to solve the problem with the information
below, visit www.lorbarista.com/support for a list of frequently asked questions
or contact the Consumer Care Center in your country.
Troubleshooting coffee machine
Possible cause
The machine is not connected to the
mains.
The machine is heating up.
Solution
Put the plug in an earthed wall
socket.
This is normal.
Werbung
