Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
ORIGINAL INSTRUCTIONS
SPECIFIED CONDITIONS OF USE
The product is intended to drive staples in soft materials, such as
wood.
The product is intended for consumer use only.
Do not use the product for any other purpose.
WARNING! Read all safety warnings, instructions,
illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric
Save all warnings and instructions for future reference.
STAPLER SAFETY WARNINGS
Always assume that the tool contains fasteners. Careless
Do not point the tool towards yourself or anyone nearby.
Do not actuate the tool unless the tool is placed firmly against
the workpiece. If the tool is not in contact with the workpiece, the
Disconnect the tool from the power source when the fastener
jams in the tool.
may be accidentally activated if it is connected to a power source.
Use caution while removing a jammed fastener. The mechanism
may be under compression and the fastener may be forcefully
Do not use this stapler for fastening electrical cables. It is
hazards.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Always ensure that the workpiece contact is fully positioned above
the workpiece could cause the staple to completely miss the
Keep hands and body parts clear of the immediate work area.
Hold the workpiece with clamps when necessary to keep hands
and body out of potential harm. Make sure that the workpiece is
The workpiece contact may cause the work material to shift
Keep face and body parts away from the back of the tool cap when
fastener. This is a normal function of the tool. Do not attempt to
Do not drive fasteners on top of other fasteners or with the tool at
6
advisable to test the depth on a scrap workpiece to determine the
required depth for the application.
Do not point the tool towards yourself or anyone nearby when
instructions.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING!
cause a short circuit.
Do not dispose of used battery packs in the household refuse or
protect our environment.
Battery packs that have not been used for some time should be
after use.
•
away from moisture.
•
•
Battery pack protection
Transporting lithium batteries
Transportation of those batteries has to be done in accordance with
• Batteries can be transported by road without further requirement.
•
trained persons and the process has to be accompanied by
•
insulated to prevent short circuit.
•
•
•
KNOW YOUR PRODUCT
1.
Wire and screen accessory
4.
6.
Werbung
