Berner 185139 Bedienungsanleitung Seite 42

Temperature
Set the selector switch to "TEMP / °C". Place the supplied
temperature probe into the sockets "COM" and V/Ω/TEMP/CAP.
Touch the object to be measured with the measuring tip. Read
measurement value on the display.
Measurement
range
-20 to 0 °C
0 to 400 °C
400 to 1000 °C
Frequency
Set the selector switch to "Hz". Insert the black test lead into the
'COM' socket and the red test lead into the V/Ω/TEMP/CAP socket.
Using the test probes, touch the test points of the test circuit.
Read measurement value on the display.
Measurement
range
20 kHz
-Sensitivity: 200 mV
-Max. input voltage 10 Vrms
Maintenance
The instrument does not require special maintenance when used
as specified in this operation manual.
Resolution
1 °C
Resolution
10 Hz
41
Accuracy
± 5 % + 5 digits
± 2 % + 3 digits
± 1 % + 3 digits
Accuracy
± 1.5 % + 10 digits