Berner 185139 Bedienungsanleitung Seite 35

Switches, buttons and sockets description
(1) ON/OFF switch
(2) Lighting switch
(☼)
(3) Memory log
button (H)
(4) Measuring
function selector
switch
(5) 10 A socket
(left)
(6) mA socket
(7) Input socket
V/Ω/TEMP/CAP
(8) Ground socket
34
The device is turned on
and off using the
"POWER" push-button
switch.
Press this button to turn
the torch function on and
off.
Press this button to store
the actual measurement
value.
Use the rotary selector
switch to select the
various measurement
modes.
The 10 A socket must be
used for current
measurements above
200 mA.
For current
measurements up to 200
mA.
Red test lead for all
types of signals
supported by the
instrument.
Black test lead for all
types of signals
supported by the
instrument.