Werbung
Verfügbare Sprachen
Verfügbare Sprachen
it will go.
5.
Put a padding (C) on the seat and mount the 5-point harness (M). Thread the ends
of the harness through the five notches in the padding. Then insert the harness ends
in the same place through the holes in the seat.
6.
Screw on the partition (D) to the bottom of the table with the tray (B) with the provided
screws. Slide the table with the partition into the guides on the side walls of the seat,
while keeping the lock levers on both sides of the bottom of the table pressed in.
7.
Attach the basket / storage compartment (J) between the stabilisation connectors.
Thread the ends of the storage compartment straps through the holes in the
connectors on the top side. Make sure that the stitches of the storage compartment
are on the outer sides of the chair.
CONVERTING AND ADJUSTING THE CHAIR
1.
To adjust the distance between the table and your child, press both locking levers
underneath the table at the same time and move the table with the tray away from
or towards your child.
2.
To fold the legs of the chair, press the large, round buttons on both sides of the seat
at the same time and fold the legs.
3.
To change the height and function of the chair, remove the lower legs together
with the wheels and anti-slip feet. Then remove the basket / storage compartment,
unhook the harness and optionally also the table with the tray. In this form, the
feeding chair can be used as a play chair.
SAFETY HARNESS
5-point harness attached to the seat can be adjusted to the height of the child so as to
make the child comfortable. Adjust the harness and make sure that the child is safe and
comfortable in the chair. Then fasten the harness to protect the child against slipping out
of the chair. To unfasten the harness, press the button on the buckle.
REMOVING THE STRAPS AND COVERING
To remove the harness, put the fixing elements which lock the harness in place through
the holes on the back of the backrest and under the seat. When your remove the harness,
you can also easily remove the covering from the seat.
ENVIRONMENT
For the sake of the environment, when you no longer use the product, dispose of it in a
suitable waste management facility in accordance with local law
CLEANING AND MAINTENANCE
•
This product requires regular maintenance.
•
It needs to be cleaned and maintained by an adult.
•
Clean the chair with a damp cloth, using water with soap.
•
To avoid friction between moving parts, which may cause damage to the chair,
16
Werbung
