Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Drawings and photos are for illustrative purposes only. The actual appearance
of the product may differ from the visualisation in the product manual.
DESCRIPTION
• 2-in-1: high feeding chair for children
from 6 to 36 months (max. child
weight 15 kg) and low chair for older
children
• Simple and quick folding system with
large and convenient buttons
• Stable legs with an anti-slip finish
• Includes 4 locking casters for easy
chair movement
• 2-level adjustable legs
• Adjustable and detachable tray with a
PARTS OF THE SET
A
Seat
B
Table with a tray
C
Seat upholstery
D
Partition + screws x4
E
Leg folding/unfolding mechanism x2
+ screws x4
F
Left feet with anti-slip pads x2
CHAIR INSTALLATION
1.
Join the lower (K) and upper (L) parts of the chair's legs together by placing them
in the stabilisation connectors (I). Note that the upper legs have one hole and one
locking button at the joint with the lower leg parts and one locking button at the other
end. The lower legs are tapered at the joint and have one locking button and notches
at the other end.
2.
Install the legs folding / unfolding mechanisms (E) on the underside of the seat (I).
Pay attention to the markings of the mechanisms: R - right side, L- left side of the
seat. Place the mechanisms in the seat until the large button is locked in the hole on
the side of the seat. Then tighten the mechanisms with provided screws.
3.
Place the folded frames of the front and rear legs in the holes in the folding / unfolding
mechanisms of the seat legs. On the ends of the lower legs, put on feet with anti-slip
pads (F, G). Pay attention to the markings of the feet: R (G) – right, L (F) - left, always
looking from the front and rear of the chair. There are plastic tabs inside the feet that
need to be fitted into the notches at the ends of the lower legs. This way the feet will
be correctly mounted and locked in place.
4.
Fit the castors (H) in the chair feet. Make sure that each castor is tightened as far as
detachable top
• Shaped top with a cup holder
• Comfortably shaped seat
• Easily washable seat covering
• Soft artificial leather upholstery
• 5-point harness
• Protection against slipping out of the
chair
• Comes with a suspended basket for
accessories
G
Right feet with anti-slip pads x2
H
Castors x4
I
Stabilisation connectors / footrests
J
Basket / storage compartment
K
Lower legs
L
Upper legs
M
5-point harness
15
Werbung
