be cool BC16SFRC Bedienungsanleitung Seite 160

TIMER button (4):
Press this button to set the required time. The following illustration shows the
sequence of the timer setting.
Do not press the timer button if the fan is to be operated continuously. In this
case, all timer LEDs are switched off.
MODE button (5):
Press this button to choose between three different wind modes. Press the button
to choose between normal, natural and sleep mode.
CLEANING
Always disconnect the mains plug from the socket before cleaning.
•
DO NOT immerse the unit in water or spray it with other liquids.
•
DO NOT use solvents or other chemical products for cleaning. Store the
fan in a dry place when not in use.
•
When you stop using the fan at the end of the season, wipe off the dust to
keep it in good condition for the next season. If necessary, dismantle the grille
and remove the fan; clean it with a soft, damp cloth.
IMPORTANT NOTICE:
Page 160 from 162