Herunterladen Diese Seite drucken

profi-pumpe BAUMSTUMPF & TONKRUGE-2 Bedienungsanleitung Seite 5

Solar-brunnen

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

8. BATTERY REPLACEMENT
After used for 12 to18 months, the battery have reached it's service life, you should replace the battery. Unscrew the
battery cover, replace the battery with a new one. Please pay attention to limited Warranty: 3 months.
How to replace the battery:
8.1 Remove LED light plug and pump
plug from solar panel
8.2 Remove cover from solar panel
above
by unscrewing (6) screws
Solar panel
Cover
Screw
(6cs)
9. SECURITY TIPS
l Obey absolutely valid regulations on the electrical security
l Never run pump dry
l Pumping inflammable, as well as all other aggressive liquids is prohibited
l Pay attention to the medium max. 40°C
l Any altering of the product itself or changing of the components is forbidden.
l With longer unused times, clean the pump, wash it out with clear water, dry and store it at room tempe-
rature
l Do not connect the pump to any AC voltage power directly, it's ONLY for DC Voltage power.
l Operate the pump in freshwater or saltwater only (never above 50°C), especially keep it away from
flammable liquids.
l All solar panels are very sensitive, protect it before all against external mechanical influences (shock, vibration, etc.)
The manufacturer explains:
l To take over no responsibility in the case of accidents or damages on the basis of carelessness or disregard to the
instructionsin this book.
l to reject every responsibility for the damages which originate from the improper use of the pump
10. SERVICING
If after some time the pump starts losing power or stops working, please clean up sediment in the pump shell or filter
cribs. Kindly note the pump can be opened by pressing down at the bottom of the filter housing. To clear the impeller,
open the pump housing at the front by sliding up the front plastic cover.
The solar module should only be
cleaned with soft tissue or propriety
glass cleaning solution.
1. Front case
2. Filter
3. Impeller cover
4. Impeller
5. Pump
8.3 Disconnect the connectors, then replace the old battery pack with
a new battery pack and join the connectors together
8.4 Secure the cover to solar panel with the 6 screws you removed
Battery pack
Pull off filter cover as shown
Open impeller cover, then
impeller can be easily removed
Connectors
Remove filter and rinse in water
Rinse all parts thoroughly in water
English 5
Screw
(6cs)
Cover

Werbung

loading

Diese Anleitung auch für:

Sp02120-3