Tesla SMART ROBOT VACUUM LASER AI200 Benutzerhandbuch Seite 8

3. The device supports AP mode:
- Choose "Robot Vacuum (Wi-Fi)" in the Small Home Appliance column.
- Make sure that Wi-Fi is 2.4GHz and input correct Wi-Fi password.
- Press and hold the Wi-Fi button on robot for 3s', make sure that Wi-Fi indicator light is flashing. Tick "Confirm the indicator is flashing rapidly" in the APP interface, click
"Next" and choose AP mode in the pop-up window.
- Find password-less hot-spot which started with SmartLife-XXXX in your Wi-Fi list and click to connect it. After successfully connecting to the hot-spot, return back to the
TESLA Smart APP, the APP will automatically jump to the robot connection interface. Wait for the connection and the robot can be operated after the connection is done.
8