Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Stand-alone mode
Presets colors
In the Stat mode the device will constantly emit one of 18 preset colors.
1
Press the MENU button so many times until Stat is indicated in the display. Confirm with the ENTER
button.
2
Use the buttons UP and DOWN to adjust the desired color. Confirm with the ENTER button.
Automatic mode
In automatic mode, 2 show programs are available that run at an adjustable speed.
1
Press the MENU button so many times until Auto is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (Au 1–2). Confirm with the
ENTER button.
2
Press the MENU button so many times until SPEE is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP 1 (slow) to
SP 9 (fast). Confirm with the ENTER button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1
Press the MENU button so many times until Soun is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (So 1–2). Confirm with the
ENTER button.
2
Press the MENU button so many times until SEnS is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to Adjust the microphone sensitivity to the volume of the music
(SE 1 = low, SE 9 = high).
3
Press the MENU button so many times until SPEE is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP 1 (slow) to
SP 9 (fast). Confirm with the ENTER button.
4
If you enable the silent scene mode (on setting) in menu item SILE, the LEDs will be switched off if the
volume is too low or if there is no sufficient bass beat. If you disable this mode (off setting) the LEDs
remain on during periods without music.
Color mix
In Colo mode each of the 4 color LEDs can be individually adjusted in intensity. The device will then
constantly emit the chosen color setting.
1
Press the MENU so many times until Colo is indicated in the display. Confirm with the ENTER button.
2
Now the display indicates the letter r*** for the color red and the corresponding brightness value. Use the
buttons UP and DOWN to adjust the desired brightness.
3
Confirm with the ENTER button. Now the color green can be set, then blue and white until the desired
color intensity is achieved.
Total brightness
Menu diMM allows adjusting the total brightness for all stand-alone operating modes.
1
Press the MENU button so many times until diMM is indicated in the display. Confirm with the ENTER
button.
2
Use the buttons UP and DOWN to adjust the desired brightness (dI 1 = dark, dI 9 = bright). Confirm with
the ENTER button.
26/32
00134667, Version 1.0
Werbung
