ECOVACS WINBOT W2 OMNI Installationsanleitung Seite 5

10. Only use accessories recommended or
supplied by the manufacturer. Only use the
Power Adapter supplied by the manufacturer.
11. Please make sure your power supply voltage
matches the power voltage marked on the
Power Adapter.
12. Do not use the Appliance on a framed glass
with a frame smaller than 5 mm (0.2 in).
13. Do not use on glass less than 3 mm (0.12 in)
thick or mirrors less than 4 mm (0.16 in) thick.
14. Do not use on glass or mirrors with a handle
height of 70~105 mm (2.76~ 4.13 in).
15. Do not use the Appliance on greasy windows.
16. When used in high humidity environment, the
cleaning performance will be affected.
17. Store the Appliance away from heat and
flammable materials.
18. In rainy weather, do not use the Appliance
on the exterior window to avoid the risk of
Appliance's damage or falling.
19. Do not use the Appliance if it does not firmly
attach to the glass or has visible signs of damage.
20. To reduce the risk of electrical shock, do not
put the Appliance in water or other liquid. Do
not place or store Appliance where it can fall
or be pulled into a tub or sink.
21. Do not touch power plug with wet hands.
EN 4
22. When charging the Appliance, do not place it
on other electrical appliances and keep it away
from fire and liquid.
23. Take care not to damage the power cord. Do
not pull on or carry the Appliance by the power
cord, use the power cord as a handle, close
a window on the power cord, or put heavy
weights on the power cord. Keep power cord
away from hot surfaces.
24. Do not use with a damaged power cord or
receptacle. Do not use the Appliance if it is
not working properly, has been dropped,
damaged, or come in contact with water. It
must be repaired by the manufacturer or its
service agent in order to avoid a hazard.
25. If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent in order to avoid a hazard.
26. The plug must be removed from the receptacle
before cleaning or maintaining the Appliance.
Do not unplug the Power Adapter by pulling
on the power cord.
27. The Safety Battery must be replaced by the
manufacturer or its service agent in order to
avoid a hazard.
28. The Safety Battery must be removed and
discarded according to local laws and