ECOVACS WINBOT W2 OMNI Installationsanleitung Seite 10

Quick Start
1. Open the Flip as shown in the picture.
2. Take WINBOT out and remove all protective materials.
3. Long press Power button for 2 seconds to turn on Station and
WINBOT.
*The initial charge can sustain WINBOT for approximately 40 minutes of operation in the
default mode.
4. Add ECOVACS WINBOT cleaning solution to the Water Tank.
*Do not add too much cleaning solution to overflow the Water Tank.
*Do not use cleaning solution from other manufacturers.
Maximum ： 60ml
9 EN