Herunterladen Diese Seite drucken

ECOVACS WINBOT W2 OMNI Installationsanleitung Seite 6

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13
regulations before disposal of the Appliance.
29. The Appliance must be disconnected from
the receptacle before removing the battery for
disposal of the Appliance.
30. Please dispose of used batteries according to
local laws and regulations.
31. Do not incinerate the Appliance even if it is
severely damaged. The battery can explode in
a fire.
32. The Appliance must be used in accordance
with the directions in this Instruction Manual.
The company cannot be held liable or
responsible for any damages or injuries
caused by improper use.
33. WARNING: For the purposes of recharging
the battery, only use the detachable supply
unit GM65-240275-2D provided with this
Appliance.
34. The robot contains batteries that are only
replaceable by skilled persons.
35. The plug and the Power Adapter must be used
indoor.
36. If the vacuum glass, which WINBOT is working
on, is leaking, remove WINBOT immediately
after cleaning is completed.
37. Before cleaning, please observe the area to
attach WINBOT for any small particles. If there
are any, please remove them or switch to a
particle-free area to avoid scratching the glass.
38. Clean the Mopping Pad in time and make sure
that any small particles on it are completely
removed to avoid scratching the glass.
To satisfy RF exposure requirements, a separation
distance of 20 cm or more should be maintained
between this device and persons during device
operation.
To ensure compliance, operations at closer than this
distance is not recommended. The antenna used for
this transmitter must not be co-located in conjunction
with any other antenna or transmitter.
Class II
Short-circuit-proof safety isolating
transformer
Switch mode power supply
For indoor use only
Direct current
Alternating current
5 EN

Werbung

loading

Diese Anleitung auch für:

Wg821-11