Indel B K CELLAR 36 ECOSMART Gebrauchsanleitungen Seite 26

WINE K CELL AR 36 ECOSMART
Start-up and use
SETTING THE TIME
If you press any button from P1 to P4 various times, the display will show the selected programme
and the time.
To set the time, press P2 and P3 at the same time. The hour digits flash and the display shows
the words "set time".
Press - (P2) and + (P3) to set the exact time.
To set the time, press P2 and P3 at the same time.
Press P4 to save the new time setting. The display shows the current time.
To set a programme (P1, P2, P3 or P4), press the button of the chosen
programme for at least 2 seconds.
If the batteries are low, the display shows this symbol.
Press ON/OFF to switch off the appliance. The display indicates "Off". Press
the ON/OFF key to re-activate the remote control.
Please note!
After a power outage lasting less than 48 hours, the appliance will switch on again with the
most recently set programme. After a power outage lasting more than 48 hours, the appliance
will switch on again set to the default programme For re-programming, follow the instructions
in the REMOTE CONTROL section.
Please note!
If the power supply has been intentionally disconnected, wait at least 15 minutes before switching
the appliance on again (i.e. before connecting it to the mains). Otherwise, the compressor may
shut down for a few minutes before resuming normal operation.
WINE K CELLAR 36 ECOSMART_14-04-2022
24
SET TIME
TIME
OFF