Settings
60
3 . Press flash button again for the icon to appear on the LCD screen . This means the flash function has been
„forced on" (manual flash) .
If the flash is not ready, a green LED will light up and the icon will flash repeatedly- wait until the flash is ready
before taking a photo .
4 . Press flash button until the
5 . Press flash button until the
setting .
Note: A "low battery" warning will appear on the LCD screen if there is insufficient battery power to operate
the flash .
Short cut buttons on the menu dial
The camera has 4 short cut buttons to make for quick access to the following settings:
– Scene (left button), self-timer (down button), delete (right button) and flash (up button) .
Press the relevant button to activate the setting options .
Self-timer
– Press self-timer button to toggle through the 4 self-timer options: off, 2 sec, 5 sec, 10 sec, double (two photos
in a row)
ENGLISH
icon appears on the LCD indicating that the Red-Eye reduction is on .
icon appears again . This will turn off the flash function . This is the default flash