Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TROUBLESHOOTING
dealer to carry out repair work.
smn
ee
Power plug is disconnected.
Check the connection.
Connection is incorrect.
Check the connection.
Control knobs are set incorrectly.
Set the correct positions depending on playback
:
conditions.
Cannot record.
Tabs of the cassette tape are removed.
Use another tape, or affix adhesive tape to the
tab position (see page 4).
Head is not clean.
Clean the head (see page 21).
REC LEVEL control knob is set to
"O
Turn the REC LEVEL control knob clockwise.
Bias value is improper.
Turn the CALIBRATION-BIAS control knob
counterclockwise. (see page 13.)
Check if the tape has a CrO2/METAL detection
hole.
Insufficient high-pass range
Turn the DOLBY NR switch OFF.
A tape not recorded by DOLBY NR system is
played back with the DOLBY NR switch set to ON
(B-type or C-type).
Clean the head (see page 21).
The tape contains distortion.
Replace the cassette tape.
REC LEVEL is set too high.
Decrease the REC LEVEL.
Clean the pinch roller, capstan and head (see
page 21).
Clean the head (see page 21).
Blanks between songs are less than 4 seconds.
Sound is distorted.
Sound is unstable.
A lot of noise occurs.
MUSIC SEARCH does not
function.
Use a proper cassette tape.
20
<RRE1028>
En
Werbung
