FLINQ Xyro Bedienungsanleitung Seite 8

Manuel
EN
Notes
- If any problems, please restore the lamp to factory default and set it up again from
start!
- Never connect several Wi-Fi light in series!
- Make sure the Wi-Fi networks are 2.4Ghz only during setup.
- The Wi-Fi authorization method should be set as WPA2-PSK and Encryption type as
AES or set both at AUTO or newer.
- Do not exceed the total power capacity from the smart lights with the used
appliances/devices!
- Wireless router cannot be set as 802.11N.
- For Google assistant and Alexa; if these cannot be found, try to disable the FLINQ
function or the home skill app (for Alexa)
- If you need to fully RESET the Smart lamp follow the RESET instructions in the FLINQ
app or the FAQ.
- Do not open the Smart lamp yourself
- This Smart Lamp is not a TOY, Keep away from children!
- Only use this smart lamp with earthed power outlets and not with extension cables
(for charge)
- Do not use with appliances that could cause any fire in unattended use (like irons etc)
- This Smart lamp does not have any safety disconnection
- Any other use as the intended way for this Smart lamp is not validated for any
warranty or liability.
- This Smart lamp is only used for private use
Instructions for use and maintenance
In case of non-use, store the product in a cool and dry place away from direct sunlight.
Caution: NON-Replaceable LED lights!
Troubleshooting
Light does not turn on?
- Button use: Try to power on/off by the button remote or re-connect the USB cable
connection or adapter from the main power outlet.
- Remote control not working: The RF signal maybe weak when there is a strong visible
light or barrier. Normal range should be effective within 30 meters.
Or remove the old batteries by opening the battery cover and remove of the cover
from the remote control. Take notice of the positive (+) and negative (-) side of the
batteries, make sure that the new batteries (AAA 1,5V) is inserted the right way. Click
the cover back on and dispose of the old battery responsibly.
- Not working: Is the battery full from the remote? Please replace and make sure the
adapter is connected to the mains power and retry.
- Poor distance: Use it inside a range of max. 30 meters without any obstacles.
The battery runs out too quick?
- Weak battery: We suggest only to use dry alkaline batteries from A-brands.
Note: If the lamp does not work or respond at any possible way by the remote
please disconnect the power adapter from the mains power outlet and wait for at
least 15min and then re-connect it again.
Cleaning the device itself
- Make sure the lamp is kept dust free and clean. Clean it regularly with a dry anti-
static cloth and with warm, soapy water but make sure that no water liquid can enter
the lamp luminaire. Dry the lamp before turning it ON again.
- Please do not immerse the main unit in water, it is not waterproof!
- Wipe gently with a clean soft cloth (microfiber) dampened with water or a mild
detergent.
- Do not use a strong irritant lotion such as gasoline, alcohol or rubber water.
This product is designed, produced and tested in accordance with the strictest
European safety directive's and test standards.
Disposal Information
Separate collection.
This symbol means the product must not be discarded with the general household
waste. There is a separate collection system for these products.
FlinQ Smart Indoor Xyro Floorlamp