FLINQ Xyro Bedienungsanleitung Seite 3

Manuel
EN
Display index CRI>80
Number of lamp LED beads 5050 RGB IC 60x + 2835 Warm white 60x + 2835
cool white 60x
Product color temperature warm white (2800-3200K) / white (6000-6500K) /
RGB Symphony Colors
LED life 40000 hours max.
Working temperature 0 degrees celcius ~ + 45 degrees celcius
IP Grade IP20 (indoor use only)
Shell material ABS + PC + metal iron spray paint
Lighting Symphony colors 232 lighting effects
mode +/-
Remote control
Buttons: 10x
Button function: ON/OFF, SYMPHONY START/PAUSE, SPEED +/-, BRIGHTNESS +/-,
LIGHT SWITCH, SYMPHONIC MODE +/-, RING COLOR
Remote control type: RF433 radio frequency remote control
Remote control distance: up to 30 meters (open area)
Remote control power supply: 3x AAA (LR03) batteries (not included, optional)
Control quantity: One remote control can control multiple lights (only for the single
colors) or 1 light selectable for your choice
European Regulatory Notice for wireless function in Europe
- Frequency Range: 433.92 Mhz + 500 Khz
- Antenna Gain: 1.8 dBi
- Max Radio Transmission power: <10dBm
This product is a lifestyle product
- Read and follow the instructions contained in this manual carefully. Keep these
instructions at a safe place for future reference.
- The operating life of the product will be less if the ambient temperature is higher
than 45°C or lower than -10°C.
Please note
- Choose a stable, solid and supportive surface and make sure the lamp is set
correctly.
- Make sure the cables cannot cause a trip hazard.
- Make sure there is enough ventilation around the device and so not cover it at all
times.
- This lamp is intended for inside use and the main power adapter and remote control
is not waterproof! Keep away from water and only use indoors.
WARNING: Keep the external adapter out of reach of children.
Never charge this product in moisture conditions or in the rain. Only charge it indoors,
in a dry place.
- This is not a TOY, keep away from small children below 12 years.
- Do not open or disassemble the lamp or adapter yourself, this will void the warranty
at all times.
- Do not disassemble, repair or modify the product by yourself as this may result into
an electric shock.
- Do not look directly into the lamp beads as it could hurt your eyes.
- The led source is not replaceable.
- If the cable or adapter is damaged or broken please contact your seller for correct
replacement by the manufacturer only.
- Do not stand, sit on, jump or throw with the lamp at all times.
- Do not throw this product in the air as it may cause damage by falling.
- Only use the lamp for its intended designed use as a light.
- Take good care of the product and clean it regularly.
- Never touch the plug contacts with sharp or metal objects.
- Use only the original power supply and original accessories.
- Do not use the device outdoors.
- Protect the device from special liquids and vapors.
Note
- Please note that the power port of the device should not be infiltrated by water.
Otherwise, it will cause a product failure.
- Do not charge or store the product in a place below 0°C or above 40°C, otherwise
the product performance will be reduced.
- It is a normal phenomenon that temperature of the adapter rises during use.
FlinQ Smart Indoor Xyro Floorlamp