Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Caution: Prevent burns. Do not touch the hot boiling water; it is very hot.
• If you are not going to continue using the device, remove the plug from the power socket.
Thermostat
The device features a built-in thermostat that automatically shuts OFF the device in case of overheating or abnormal
operation. If the device becomes too hot (overheating), the thermostat and fuse will activate and stop the device from
working. Let it cool down for approximately 15 minutes and the fuse will reset automatically.
The device can be used again.
In case the device does not operate normally after it has cooled down, it is recommended to reset the thermostat fuse
manually by pushing the reset button key in the small reset buttonhole, until you hear a click. Please use the reset
button key for this action.
Reset key
Drainage stopper
In case the device will not be used for a long period of time, clean it and remove the wastewater.
Open the drainage stopper by turning it counter-clockwise, so the wastewater can flow out. Once all the wastewater
has been removed, place the drainage stopper back by turning it clockwise and make sure it tightens well.
Note! In case of any water leakage after filling the water tank, check that the drainage stopper is properly tightened.
8
Werbung
